Cold Drawn Precision Steel Tube GB/T3639 20# OD 32mm Wall 3mm Honed for Hydraulic Cylinder
Cold Drawn Precision Steel Tube GB/T3639 20# OD 32mm Wall 3mm Honed for Hydraulic Cylinder
起源の場所
中国
ブランド名
Jingwei
証明
ISO 9001:2015, GB/T3639, EN 10305-1 on request
モデル番号
JW-PRE-3639
製品詳細
学年:
20#(CK20/S20C)
外径×重量:
32mm×3mm
穴の許容差:
H8/H9、粗さRa0.2~0.4
ハイライト:
GB/T3639 precision tube
,
honed hydraulic cylinder tube
,
32mm cold drawn tube
支払及び船積みの言葉
最小注文数量
1トン
価格
USD 980 - 1250 per ton FOB Tianjin
パッケージの詳細
木製ケースにバンドルされており、ボアにはオイルが塗られており、端はキャップ付きです
受渡し時間
預金後15~25日
支払条件
T/T 30% のデポジット、B/L コピーに対する残高;一目でわかるL/C
供給の能力
月あたり800トン
製品の説明
A hydraulic cylinder tube is bought on the inside diameter, not the outside. The bore has to hold tolerance along the full stroke, the surface has to seal against a polyurethane or PTFE rod seal, and the wall has to be uniform enough that the honing tool does not break through into a thin section. This GB/T3639 cold drawn tube is produced from grade 20# seamless hollow, cold drawn to near final size, then honed to an H8 or H9 bore with a surface roughness of Ra 0.2 to 0.4